Subwoofer Boxes
-
Audison APBX 10 AS2
ACTIVE SUB BOX
The Prima APBX 10 AS2 active subwoofer, with 10-inch driver,features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size.
The amplification module, with power outputs of 400W RMS is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes.
Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra low impedance (0.16 ohms for APBX 10 AS).
This feature ensures a perfect synergy with the he-li (High Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers and sealed box, to obtain low, powerful and crisp frequencies.The controls section is complete and provides an optimal regulation of the low frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response in the lower side of the spectrum.
The high-level speaker-in input on multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source’s remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 – 180 °) completes the equipment.
The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.
-
Audison APBX 10 DS
The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.
-
Audison APBX 10 S4S
SEALED SUB BOX
The APBX 10 S4S sealed enclosure is the ideal choice to be driven by the new AP F8.9 bit using two channels bridged. Designed to house the single 4Ω voice coil APS 10 S4S subwoofer, it offers an ultra-performing Plug & Play solution boasting all the features that make the Prima boxes unique such as the SSP (Sub Smart Plug) terminal block for a quick connection leaving no room for errors.
-
Audison APBX 8 AS2
ACTIVE SUB BOX
The Prima APBX 8 AS2 active subwoofer, with 8-inch driver,features a dedicated high performance amplification module which enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size.
The amplification module, with power outputs of 250W RMS is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes.
Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra low impedance.
This feature ensures a perfect synergy with the he-li (High Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers and sealed box, to obtain low, powerful and crisp frequencies.The controls section is complete and provides an optimal regulation of the low frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed, when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response in the lower side of the spectrum.
The high-level speaker-in input on multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source’s remote signal, by the voltage variation on the high-level input or by the audio signal on both inputs. Phase control (0 – 180 °) completes the equipment.
The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely.
-
Audison APBX 8 DS
The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 Ω dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2-ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speaker’s high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.
-
Audison APBX 8 R
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as “cabin gain”. The 8-inch single 4 Ω voice-coil subwoofer has a powerful motor that maximizes efficiency in combination with the AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AP4.9 bit / AP4 D bridged channels, capable of delivering 260 W rms.
-
Audison APBX G6
The Plug&Sound sealed passive subwoofer system integrates perfectly into the car’s interior. The subwoofer itself has been engineered to mate perfectly with the available enclosure volume, exploiting all the power the AP8.9 bit delivers.
-
Audison APBX G7
The Plug&Sound reflex passive subwoofer system integrates perfectly into the car’s interior. The subwoofer itself has been engineered to mate perfectly with the available enclosure volume, exploiting all the power the AP8.9 bit delivers.
-
Helix K 10E
Compact in size but huge in sound. The new enclosure subs of the K series don’t show any mercy when their hefty beats make your car shake, rattle and roll.
Lots of technical finesse was necessary to fulfil the demands of SPL junkies and audiophile music lovers at the same time. Rock-solid cones made from hand-scooped paper in combination with heavy-duty voice coils easily transform the power of your amplifier into loads of sound pressure without neglecting neither acoustical details nor sonic precision.
Fortunately the K subwoofers are no wasters of precious trunk space at all thanks to their compact cabinet dimensions.
By the way – the double voice-coil design offers more flexibility when selecting an appropriate power amp. No matter if 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm – these “deep bass warrantors” make any configuration easily possible.
-
Helix K 12E
Compact in size but huge in sound. The new enclosure subs of the K series don’t show any mercy when their hefty beats make your car shake, rattle and roll.
Lots of technical finesse was necessary to fulfil the demands of SPL junkies and audiophile music lovers at the same time. Rock-solid cones made from hand-scooped paper in combination with heavy-duty voice coils easily transform the power of your amplifier into loads of sound pressure without neglecting neither acoustical details nor sonic precision.
Fortunately the K subwoofers are no wasters of precious trunk space at all thanks to their compact cabinet dimensions.
By the way – the double voice-coil design offers more flexibility when selecting an appropriate power amp. No matter if 1 x 4 Ohms, 2 x 2 Ohms or 1 x 1 Ohm – these “deep bass warrantors” make any configuration easily possible.
-
Helix QE10
The QE10 vented subwoofer enclosure is the perfect solution for all those who don´t want to build an enclosure for the Q 10W subwoofer chassis by themselves.
Thanks to the very solid construction made from rigid MDF panels as well as the meticulous alignment to the Q 10W driver, excellent bass performance is guaranteed.
A further feature highlight is the 4-pole connection terminal, which allows most flexible configurations with 2 x 2 Ohms, 1 x 4 Ohms or 1 x 1 Ohm impedance. -
Helix QE12
The QE12 vented subwoofer enclosure is the perfect solution for all those who don´t want to build an enclosure for the Q 12W subwoofer chassis by themselves.
Thanks to the very solid construction made from rigid MDF panels as well as the meticulous alignment to the Q 12W driver, excellent bass performance is guaranteed.
A further feature highlight is the 4-pole connection terminal, which allows most flexible configurations with 2 x 2 Ohms, 1 x 4 Ohms or 1 x 1 Ohm impedance. -
Helix T 10E
The new entry into the world of HELIX subwoofers – the HELIX T 10E
Small in size but a giant in sound performance – smart details like the stiff glassfiber-paper compound cone, the 4-layer voice coil with dual ventilation system or the large-sized bassreflex port assure rich bass response and maximum sound pressure without neglecting acoustical details or sonic precision.
The sturdy enclosure made from rigid MDF panels is covered with hard-wearing carpet and provides, in combination with the stable metal bars, perfect protection for the subwoofer chassis.
The T 10E impressively proves that powerful bass is no matter of budget and doesn’t necessarily come along with large enclosure dimensions. -
Match PP 10E-Q
For every purpose the right kind of bass – these subwoofers are the ideal complement for the MATCH Plug & Play amplifiers. Make your choice for the right combination depending on trunk space and your demand for maximum sound pressure level.
These subs really prove that the intelligent combination of amplifier with extensive DSP technology and speaker can lead to deep and powerful bass response in your car, even with small sized enclosures. The secret lies in the “team play” of both components – only in combination with the MATCH Plug & Play amps these subwoofers will be able to deliver ultimate acoustical performance that will totally take you by surprise!