Adaptor/Harness
-
Audison APBMW BIAMP 2
BMW – MINI OEM REPLACEMENT
APBMW BIAMP 2 Plug & Play T-harness provides the ability to:
1. Take the front speaker output signal from the OEM head unit through the under-seat woofer connector and route it to the AP bit amplifier input.
2. Separately route the signal from the AP bit amplifier outputs to the front midrange housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables.
The APBMW BIAMP 2 is compatible only with BMW and MINI vehicles that are not provided with an OEM amplifier. The package contains a pair of cables, for left and right channels. The cables are 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed.
-
Audison APBMW REAMP 1
BMW – MINI OEM REPLACEMENT
This Plug&Play harness provides the ability to replace the OEM BMW amplifier with an Audison AP bit on BMW vehicles equipped with the optional “Hi-Fi” sound system.
The OEM seven-channel analog amplifier is connected via a forty-two pin multipolar connector. -
Audison APSP G7 HARNESS
HARNESS CABLES ROUTING
Specific T-Harness to takes the power to supply the AP8.9 bit from directly behind the OEM head unit, connect the OEM Head Unit to AP8.9 bit amplifier and all the system speakers.
-
Audison CBT 1
RCA Bit 10 Adapter Cable
RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.
-
Audison Control Cable
CONTROL CABLE FOR AP F8.9 BIT
Provided control interconnection to control memory selection and remote power-on.
-
Audison PIC6
Pre In Connector 6
RCA connector for effortless and fast connections between the head unit PRE OUTs (1,2 min.) and the bit Nove PRE inputs.
-
Audison Pre-In Cable
6 CH RCA PRE-IN CABLE
Six stereo RCAs interconnection to connect Prima APF 8.9 bit with after-market sources with PRE-OUT outputs. Provided with AP F8.9 bit
-
Audison Prima AP T-H FRD01
PRIMA T-HARNESS FORD 2002 -> 2014
T-Harness “DCC” is the Plug&Play solution for FORD to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Prima AP T-H FRD02
PRIMA T-HARNESS FORD 2015 ->
T-Harness “DCC” is the Plug&Play solution for FORD models released after 2015 to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Prima AP T-H GMN01
PRIMA T-HARNESS GM 2009 ->
T-Harness “DCC” is the Plug&Play solution for GM to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Speaker-In Cable
SPEAKERS CABLE FOR AP/ APF 8.9 BIT
Cable with 6 pairs of labeled wires to connect AP/ APF 8.9 bit with the high level output of OEM sources. Provided with AP F8.9 bit.
-
Audison STA
F/F/ Socket Toslink Adapter
Optical adapter to extend optical cables featuring TOSLINK connectors.
-
Match PP-AC 00
Car-specific radio adaptor cable – PSA Quadlock
-
Match PP-AC 01
Car-specific radio adaptor cable – PSA Quadlock from 2015
-
Match PP-AC 02
Car-specific radio adaptor cable – Isuzu
-
Match PP-AC 03
Car-specific radio adaptor cable – Chevrolet, Saab (14 + 16 pin)