Total Power 14,4 @ 2 Ohms |
4 x 260 WRMS |
Total Power 14,4 @ 4 Ohms |
2 x 520 WRMS |
Total Power 12,6 @ 2 Ohms |
4 x 200 WRMS |
Total Power 12,6 @ 4 Ohms |
2 x 400 WRMS |
Efficiency @ 4 Ohms |
84% |
Efficiency @ 2 Ohms |
78% |
Input Voltage |
9 – 15V |
Input Impedance |
22K Ohms |
THD+Noise |
<1% |
Input Sensitivity |
150mV – 2,1V |
SNR |
83dB |
Frequency Response |
30 to 30kHz (-3dBs) |
HPF (High Pass Filter) |
30 to 80Hz @ 12dB/octave Linkwitz-Riley |
LPF (Low Pass Filter) |
80 to 30kHz @ 12dB/octave Linkwitz-Riley |
Recommended Fuse |
50 A |
Current at Rest |
1 A |
Average Current Draw (Sinusoidal) |
90 A |
Average Current Draw (Music) |
40 A |
Power Wire Gauge (min. Recommended) |
16mm / 5 AWG |
Speaker Wire Gauge (min. Recommended) |
2 x 2,5mm / 2 x 14 AWG |
Weight (Lb) |
6,9 |
Height (in) |
2,2 |
Width (in) |
8,4 |
Depth (in) |
9,7 |
Description
Related products
-
Match M 2FX
Tiny amplifier with big ambitions – the M 2FX combines smallest dimensions with huge power and highest versatility.
Equipped with an active crossover with high- or lowpass, stereo line input and highlevel inputs with ADEP circuit as well as further top-notch features this ultra compact two channel amplifier perfectly acts as a stand-alone amplifier for demanding speaker systems or as power source for subwoofer applications. Due to its load stability the M 2FX is almost predestined for driving subwoofers with 2 x 2 Ohms impedance.
The proprietary Class GD technology combines excellent sound quality with extraordinary high efficiency. Thanks to its minimal dimensions and low heat dissipation unprecedented space saving and hidden installation concepts can be realized that were previously impossible.
In combination with the five channel amplifier M 5DSP from the MATCH portfolio the M 2FX is literally a “perfect MATCH”.
-
Match M 5DSP
As small as a cigarette packet but a giant in performance and function: the brand-new M 5DSP amplifier provides huge power and cutting edge technology in a remarkably small housing.
Five channels, a powerful 7-channel “fixed point” Audio DSP with 56 Bit resolution and proprietary Class GD technology predestine the amplifier for ultimate car audio performance. Its minimal dimensions as well as its high efficiency and low heat dissipation allow unprecedented space saving and hidden installation concepts, that were not previously possible.
The M 5DSP is featuring two power modes: it can be driven optionally in “HighPower” mode for maximum performance or in “MidPower” mode with reduced output power and lower power consumption for Plug & Play applications.
A subwoofer output, a remote output and a freely configurable 2-channel PreOut for hooking up additional amplifiers offers further connectivity.
Thanks to Audiotec Fischer’s DSP PC-Tool software the integrated DSP can easily configured to individual requirements. The scope of delivery includes a connection cable and an adapter cable to dock a MATCH Plug & Play or a conventional subwoofer.
-
Match M 5DSP MK2
Huge power in a tiny format
Hardly bigger than a smartphone but a giant in performance with an incredible output power of 400/ 800 Watts RMS/ max. and five amplifier channels.
These amazing figures in such a tiny space result from Audiotec Fischers proprietary Class HD-technology, which guarantees an unrivaled efficiency and therefore minimum heat dissipation. Even better – this offers unimagined possibilites when choosing the mounting location.ACO – Advanced 32 Bit platform
The M 5DSP MK2 is the first MATCH amplifier equipped with our new, extraordinary powerful 32 Bit ACO platform. This provides higher speed during the communication with our DSP PC-Tool software, but also when switching between the 10 internal memory locations for sound setups. In addition, the ACO offers an integrated, channel-separated Input EQ and Input Signal Analyzer (ISA), e.g. for compensating any kind of equalizing in the factory radio.Latest DSP technology
The extremely powerful 64 Bit audio DSP with its seven channels offers in combination with the CoProcessor ACO amazing DSP sound features, like the “Augmented Bass Processing”, the “StageXpander” and the “RealCenter” function and thus completely new possibilities in sound tuning.Power on demand
That’s unique – the M 5DSP MK2 features two power modes, allowing it to run either in “HighPower” mode for maximum performance or in “MidPower” mode with reduced output power and lower power consumption for Plug & Play applications without a separate power supply.Intuitive DSP PC-Tool
Such a bunch of technology must remain operable – our professional and user-friendly DSP- PC Tool software V4 impressively demonstrates that a huge feature set and an easy configuration can be perfectly harmonized. -
Helix C ONE
The sound power house – extremely powerful and stunning sound quality
The C ONE is a high-end 1-channel amplifier that is able to drive even powerful subwoofers to the max. The ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker.
Additionally the intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power that is almost independent of the cars battery voltage. And for even more output power, two C ONE amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link.
Despite its impressive output power, the C ONE is by no means a pure subwoofer amplifier. Thanks to an extended frequency response up to 80 kHz and an architecture that has been designed down to the last detail for ultimate sound quality, the C ONE is also a perfect buddy for heavy-duty mid-woofers in audiophile system concepts.
In combination with the optionally available digital input module HDM 1, the C ONE demonstrates the perfect transition to the digital era. The HDM 1 accepts digital audio signals up to 96 kHz sampling rate via its optical input followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C ONE is absolutely future-proof and perfectly prepared for the combination with our digital signal processors.