Signal to Noise is over 130dB, and THD+Noise is less than 0.1%. Signal level and impedance of the output are exactly the same as the input, and the frequency response of the ASP-L2T will even exceed the response of the input signal from the head unit. In fact the ASP-L2T can even be considered a “conditioner” to improve the signal from the head unit before it arrives at the amplifier. Maximum performance upgrades occur between 500mV and 1 Volt.
Zapco ASP-L2T
2-Channels Line Noise Filter
RCA line noise has been a major issue for car audio installers from the beginning of car audio.
The RCA signal from a head unit is a very low level signal, and it is fairly easy for a noise source like an ECM or other component of the cars electrical system to enter the signal path through the RCA cables.
Description
Related products
-
SounDigital SDX 4.1
1 Fixed Output / 4 Variable Outputs
12dB/oct Butterworth crossovers
Gain control on all outputs
24dB/oct Subsonic Filter on Low output
Mute option on all outputs
Phase Control (0-180)
Bass boost control on Low output
Frequency Response: 10 Hz – 100 kHz
Current Draw: 250 mA
Voltage Input: 10 V – 16 V
Advanced Protection System
THD: 0.02%
Maximum Input Level: 4 V
Maximum Output Level: 8.5 V -
Audison Prima AP F8.9 bit
8 CH AMPLIFIER WITH 9 CH DSP
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio.
The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
-
Zapco HDSP-Z16 V AD-8A
8 Channels DSP with HD Player
The Zapco Gen-V. The V-Series of HDSPs bring tuning features and sound quality never before offered in a car DSP. Up to 16 channels means you can build active systems at every corner of a multichannel sound system. HD means these are available with HD audio players as well.
-
Audison bit Ten
AUDIO PROCESSOR
bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.