Signal to Noise is over 130dB, and THD+Noise is less than 0.1%. Signal level and impedance of the output are exactly the same as the input, and the frequency response of the ASP-L2T will even exceed the response of the input signal from the head unit. In fact the ASP-L2T can even be considered a “conditioner” to improve the signal from the head unit before it arrives at the amplifier. Maximum performance upgrades occur between 500mV and 1 Volt.
Zapco ASP-L2T
2-Channels Line Noise Filter
RCA line noise has been a major issue for car audio installers from the beginning of car audio.
The RCA signal from a head unit is a very low level signal, and it is fairly easy for a noise source like an ECM or other component of the cars electrical system to enter the signal path through the RCA cables.
Description
Related products
-
Audison AP4.9 bit
AP4.9 bit amplifier is ideal to realize a powerful two way front full active. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
-
Zapco HDSP-Z16 V AD-16A
16 Channels DSP with HD Player
The Zapco Gen-V. The V-Series of HDSPs bring tuning features and sound quality never before offered in a car DSP. Up to 16 channels means you can build active systems at every corner of a multichannel sound system. HD means these are available with HD audio players as well.
-
Zapco DSP-Z8 IV II
8 Channels DSP with BT Streaming
The hardware inside is where the magic begins. A quick fact: You can only be as good as your source material, and the DSP-Z8 IV II series greatly expands your potential for the best possible source material. The Toslink optical input accepts the digital signal from your head unit or from a portable HD player, but the IV II series doesn’t stop there. The DSP-Z8 IV II units also have digital Bluetooth streaming so you can stream digital music.
-
Helix V EIGHT DSP
$7,000.00The HELIX V EIGHT DSP 8-channel amplifier with integrated 10-channel signal processor opens up new horizons for car audio enthusiasts.
Its unique “Pure Class GD” concept and cutting-edge “fixed point” Audio DSP with 64 Bit resolution ensures extraordinary sound quality and loads of power.
Furthermore, a huge feature set provides the ideal set of pre-requisites for more complex system concepts – especially if fully active configurations are going to be built on a single and compact amplifier.
Eight speaker outputs with up to 120 Watts RMS @ 2 Ohms, two processed RCA outputs for the connection of additional amplifiers, six RCA and six highlevel inputs with up to 20 V RMS input sensitivity and an optical SPDIF input make this amplifier absolutely unique in its class. The HELIX Extension Card slot (HEC) allows adding even more interfaces, like the Bluetooth® Audio Streaming module or a High Resolution Audio USB soundcard.
Thanks to Audiotec Fischer’s DSP PC-Tool, the integrated DSP can be easily configured to ones individual requirements. Despite the gigantic feature content, the V EIGHT DSP presents itself in the classic HELIX design language, a clean design with very compact dimensions allows for a quick and easy integration.