Subtotal: $18,500.00
Zapco crossovers are designed to provide the very best possible sound quality, and the versatility needed for the most advanced sound systems.
THD < 0.01%THD
Signal to Noise Ratio > 110dB
Stereo Separation 90dB
Crossover Slopes 12dB
Preamp Output 9.5V RMS / 14V Peak
Dimensions in mm: 119(W) x 39(H) x 102(L) Overall: 119(W) x 39(H) x 127(L)
The PP 62DSP provides everything an up-to-date Plug & Play amplifier needs: easy installation and maximum flexibility.
Its installation effortlessly takes place via Plug & Play cable harness which is included in delivery – no cable has to be cut or modified. At www.audiotec-fischer.com the huge online sound setup database provides the appropriate setup.
The MATCH Extension Card (MEC) slot makes it possible to expand the PP 62DSP’s functionality by inserting an optional MEC module – for example a Bluetooth® Audio Streaming module, an optical digital input or a High Resolution Audio USB soundcard. In addition the PP 62DSP offers the option of hooking up additional amplifiers using the two channel pre-amp output.
Sound enthusiasts get their money´s worth as well – thanks to the professional and user-friendly Audiotec Fischer DSP PC-Tool software it becomes amazingly easy to create individual sound setups. Furthermore the PP 62DSP is optionally configurable as a 6-channel amplifier with a total of 8 DSP channels. Due to the numerous adjustment options it leaves nothing to be desired.
The ASP-L2 BT is a true 9.5Volt output line driver with 14Volts peak. The ASP-L2 has a single pair of inputs, but it has 2 pair of outputs so you can run both a bass and a highs amplifier off the same preamp output.
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio.
The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
1 Fixed Output / 4 Variable Outputs
12dB/oct Butterworth crossovers
Gain control on all outputs
24dB/oct Subsonic Filter on Low output
Mute option on all outputs
Phase Control (0-180)
Bass boost control on Low output
Frequency Response: 10 Hz – 100 kHz
Current Draw: 250 mA
Voltage Input: 10 V – 16 V
Advanced Protection System
THD: 0.02%
Maximum Input Level: 4 V
Maximum Output Level: 8.5 V
