-
Power @ 4Ω: 2 x 50 watts
-
THD @ Rated Power < 0.5%THD
-
Power @ 2Ω: 2 x 80 watts
-
Power Bridged @ 4Ω: 160W RMS
-
Signal to Noise Ratio > 95dB
-
THD + Noise < 0.5%
-
Channel Separation >60dB
-
Frequency Response 15Hz to 30KHz ±1dB
-
Input Sensitivity .25v to 5v
-
Dimensions in mm: 160(W) x 52(H) x 154(L) Overall: 160(W) x 52(H) x 180(L)
Zapco ST-2X
2 Ch. Class AB Amplifier
The most important feature shared by all the ST-X amps is the legendary Zapco sound quality, developed with over 40 years of experience.
Description
Related products
-
Match M 5DSP MK2
Huge power in a tiny format
Hardly bigger than a smartphone but a giant in performance with an incredible output power of 400/ 800 Watts RMS/ max. and five amplifier channels.
These amazing figures in such a tiny space result from Audiotec Fischers proprietary Class HD-technology, which guarantees an unrivaled efficiency and therefore minimum heat dissipation. Even better – this offers unimagined possibilites when choosing the mounting location.ACO – Advanced 32 Bit platform
The M 5DSP MK2 is the first MATCH amplifier equipped with our new, extraordinary powerful 32 Bit ACO platform. This provides higher speed during the communication with our DSP PC-Tool software, but also when switching between the 10 internal memory locations for sound setups. In addition, the ACO offers an integrated, channel-separated Input EQ and Input Signal Analyzer (ISA), e.g. for compensating any kind of equalizing in the factory radio.Latest DSP technology
The extremely powerful 64 Bit audio DSP with its seven channels offers in combination with the CoProcessor ACO amazing DSP sound features, like the “Augmented Bass Processing”, the “StageXpander” and the “RealCenter” function and thus completely new possibilities in sound tuning.Power on demand
That’s unique – the M 5DSP MK2 features two power modes, allowing it to run either in “HighPower” mode for maximum performance or in “MidPower” mode with reduced output power and lower power consumption for Plug & Play applications without a separate power supply.Intuitive DSP PC-Tool
Such a bunch of technology must remain operable – our professional and user-friendly DSP- PC Tool software V4 impressively demonstrates that a huge feature set and an easy configuration can be perfectly harmonized. -
Match UP 7DSP
The UP 7DSP is the most powerful MATCH DSP amplifier and comprises our new ADEP.3 circuitry. It offers seven amplifier channels in total as well as an additional preamp output, which allows – in combination with its integrated 8-channel DSP – to perfectly drive individual and complex speaker configurations. Two of the output channels deliver 160 Watts RMS into 2 Ohms – plenty enough for fuelling even large subwoofers.
But brute force is nothing without “smart control” – that’s why the UP 7DSP incorporates a stunning powerful 64 Bit DSP of the latest generation, which enables to realize all-new revolutionary and proprietary sound features like the “Augmented Bass Processing”, the “StageXpander” or the “RealCenter” function. Take us by our word – you will experience a truly breathtaking sound performance.
But that’s not enough – simply enjoy music from your smartphone in unprecedented quality. The UP 7DSP comes up with a MATCH Extension Card slot (MEC) for additional input and output interfaces like e.g. our Bluetooth® Audio Streaming module or a High Resolution Audio USB sound card.
Thanks to our professional and user-friendly DSP PC-Tool software V4 the configuration and set-up of the UP 7DSP is pretty straightforward and intuitive.
-
Match M 5DSP
As small as a cigarette packet but a giant in performance and function: the brand-new M 5DSP amplifier provides huge power and cutting edge technology in a remarkably small housing.
Five channels, a powerful 7-channel “fixed point” Audio DSP with 56 Bit resolution and proprietary Class GD technology predestine the amplifier for ultimate car audio performance. Its minimal dimensions as well as its high efficiency and low heat dissipation allow unprecedented space saving and hidden installation concepts, that were not previously possible.
The M 5DSP is featuring two power modes: it can be driven optionally in “HighPower” mode for maximum performance or in “MidPower” mode with reduced output power and lower power consumption for Plug & Play applications.
A subwoofer output, a remote output and a freely configurable 2-channel PreOut for hooking up additional amplifiers offers further connectivity.
Thanks to Audiotec Fischer’s DSP PC-Tool software the integrated DSP can easily configured to individual requirements. The scope of delivery includes a connection cable and an adapter cable to dock a MATCH Plug & Play or a conventional subwoofer.
-
Helix P TWO
Plenty of power and sensitivity – the new P TWO combines two talents in an absolutely unique way. Due to its RMS output power of 2 x 490 Watts into two Ohms, this compact amplifier is able to drive even powerful subwoofers to the max. The technical design is literally predestinated for all woofers with 2 x 2 Ohms dual voice coil like the new HELIX Q subwoofers.
But despite its sheer force the P TWO is by no means a pure subwoofer amplifier. On the contrary, the Ultra HD Class D concept combines an extended frequency response above 40 kHz with high damping factor, minimal distortion and excellent signal-to-noise ratio. Therefore, this amplifier is likewise a perfect buddy for heavy-duty front speakers in audiophile system concepts.