-
Power @ 1Ω: 1 x 850 watts
-
THD @ Rated Power < 0.2%
-
Power @ 2Ω: 1 x 600 watts
-
Power @ 4Ω: 1 x 400 watts
-
Signal to Noise Ratio > 85dB
-
THD + Noise < 0.2%
-
Efficiency > 85%
-
Frequency Response 10Hz to 200Hz ±1dB
-
Input Sensitivity .25v to 5v
-
Dimensions in mm: 160(W) x 52(H) x 301(L) Overall: 160(W) x 52(H) x 326(L)
Zapco ST-850XM
Mono Class D Bass Amplifier
All the ST-XM Class D bass amps are 1Ω stable as necessary in today’s market.
Description
Related products
-
Match M 5DSP MK2
Huge power in a tiny format
Hardly bigger than a smartphone but a giant in performance with an incredible output power of 400/ 800 Watts RMS/ max. and five amplifier channels.
These amazing figures in such a tiny space result from Audiotec Fischers proprietary Class HD-technology, which guarantees an unrivaled efficiency and therefore minimum heat dissipation. Even better – this offers unimagined possibilites when choosing the mounting location.ACO – Advanced 32 Bit platform
The M 5DSP MK2 is the first MATCH amplifier equipped with our new, extraordinary powerful 32 Bit ACO platform. This provides higher speed during the communication with our DSP PC-Tool software, but also when switching between the 10 internal memory locations for sound setups. In addition, the ACO offers an integrated, channel-separated Input EQ and Input Signal Analyzer (ISA), e.g. for compensating any kind of equalizing in the factory radio.Latest DSP technology
The extremely powerful 64 Bit audio DSP with its seven channels offers in combination with the CoProcessor ACO amazing DSP sound features, like the “Augmented Bass Processing”, the “StageXpander” and the “RealCenter” function and thus completely new possibilities in sound tuning.Power on demand
That’s unique – the M 5DSP MK2 features two power modes, allowing it to run either in “HighPower” mode for maximum performance or in “MidPower” mode with reduced output power and lower power consumption for Plug & Play applications without a separate power supply.Intuitive DSP PC-Tool
Such a bunch of technology must remain operable – our professional and user-friendly DSP- PC Tool software V4 impressively demonstrates that a huge feature set and an easy configuration can be perfectly harmonized. -
Audison Prima AP F8.9 bit
8 CH AMPLIFIER WITH 9 CH DSP
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio.
The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
-
Helix C FOUR
Audiophile sound quality combined with impressive output power
The C FOUR is a high-end 4-channel amplifier that has been designed down to the last detail for ultimate sound quality. Audiotec Fischer’s proprietary ultra low-noise and ultra low-distortion Class A driver stage feeds a total of 32 hand-selected MOSFET power transistors, resulting in an incredible damping factor of 1,000 for relentless control of every loudspeaker. The intelligent regulation of the power supply assures stable conditions for the output stages and therefore phenomenal output power independent of the cars battery voltage.
In combination with the optionally available digital input module HDM 2, the C FOUR demonstrates the perfect transition to the digital era. The HDM 2 accepts digital audio signals up to 96 kHz sampling rate via its two optical inputs followed by cutting-edge BurrBrown D/A converters with 32 Bit resolution that transform the signals back to the analog domain. Therefore the C FOUR is absolutely future-proof and perfectly prepared for the combination with our digital signal processors. -
Helix P TWO
Plenty of power and sensitivity – the new P TWO combines two talents in an absolutely unique way. Due to its RMS output power of 2 x 490 Watts into two Ohms, this compact amplifier is able to drive even powerful subwoofers to the max. The technical design is literally predestinated for all woofers with 2 x 2 Ohms dual voice coil like the new HELIX Q subwoofers.
But despite its sheer force the P TWO is by no means a pure subwoofer amplifier. On the contrary, the Ultra HD Class D concept combines an extended frequency response above 40 kHz with high damping factor, minimal distortion and excellent signal-to-noise ratio. Therefore, this amplifier is likewise a perfect buddy for heavy-duty front speakers in audiophile system concepts.