- Recent add item
-
Helix V EIGHT DSP 1 × $7,000.00×
Subtotal: $7,000.00
Audison
-
Audison DRC MP
Digital Remote Control
The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car.
-
Audison ECK DRC
DRC Cable Extension Kit
It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s.
-
Audison ES3
BIT ENERGY STORAGE START & STOP
It prevents the processor from shutting down when turning on vehicles featuring the start & stop system
When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down.
-
Audison OP 1.5
Toslink Optical Cable 1.5m / 59.05in
Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges.
-
Audison OP 4.5
Toslink Optical Cable 4.5m/177.16in
Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges.
-
Audison PIC6
Pre In Connector 6
RCA connector for effortless and fast connections between the head unit PRE OUTs (1,2 min.) and the bit Nove PRE inputs.
-
Audison Pre-In Cable
6 CH RCA PRE-IN CABLE
Six stereo RCAs interconnection to connect Prima APF 8.9 bit with after-market sources with PRE-OUT outputs. Provided with AP F8.9 bit
-
Audison Prima AP F8.9 bit
8 CH AMPLIFIER WITH 9 CH DSP
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio.
The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
-
Audison Prima AP T-H FRD01
PRIMA T-HARNESS FORD 2002 -> 2014
T-Harness “DCC” is the Plug&Play solution for FORD to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Prima AP T-H FRD02
PRIMA T-HARNESS FORD 2015 ->
T-Harness “DCC” is the Plug&Play solution for FORD models released after 2015 to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Prima AP T-H GMN01
PRIMA T-HARNESS GM 2009 ->
T-Harness “DCC” is the Plug&Play solution for GM to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison Prima Tower Kit
With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating.
-
Audison SFC
Sample Frequency Converter
SFC provides a solution to the issues related to digital interfacing like in the case of the Digital head-unit having a higher sampling frequency (96/192 kHz) than the receiver that can not handle frequencies higher than 48 kHz.
-
Audison Speaker-In Cable
SPEAKERS CABLE FOR AP/ APF 8.9 BIT
Cable with 6 pairs of labeled wires to connect AP/ APF 8.9 bit with the high level output of OEM sources. Provided with AP F8.9 bit.
-
Audison Speakers Cable
SPEAKERS CABLE FOR AP/ APF 8.9 BIT
Cable with eight pairs of labeled cables to connect the speakers to the AP/ APF 8.9 bit amplifiers. Provided with AP F bit, and AP bit amplifiers.
-
Audison SPM 4
4 CH Stereo Passive Mixer
Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response.