- Recent add item
-
Helix DSP PRO MK2 1 × $5,500.00×
Subtotal: $5,500.00
-
Audison AP T-H MBP01
PRIMA T-HARNESS MB, PORSCHE
T-Harness “DCC” is the Plug&Play solution for PORSCHE and MERCEDES-BENZ to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison AP T-H TOL01
PRIMA T-HARNESS TOYOTA, LEXUS
Harness “DCC” is the Plug&Play solution for LEXUS and TOYOTA to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
-
Audison AP1 D
The AP1 D amplifier was designed to drive a subwoofer and is the ideal extension of the AP8.9 bit and AP4.9 bit. At 2 Ohms it is stable and can supply 540 W power with extremely compact dimensions. With the APTK 3 (Audison Prima Tower Kit 3) stacking system it’s possible to stack the AP1 D and save space without any problem of overheating.
-
Audison AP4 D
The AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.
-
Audison AP4.9 bit
AP4.9 bit amplifier is ideal to realize a powerful two way front full active. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
-
Audison AP5.9 bit
AP5.9 bit amplifier is ideal to realize a two way front full active plus subwoofer system using the fifth mono channel with 270 W @ 2 Ω. The built-in processor with 9 output channels, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP4 D amplifier, creating a very powerful system in a small space thanks to the optional stacking system.
-
Audison AP8.9 bit
The AP8.9 bit amplifier was designed by Audison R&D Department to achieve maximum sound quality in OEM Integration applications. The powerful management software proves the ability to acquire the bit Drive presets which the Audison team fine-tuned specifically for your car. Thanks to the innovative power supply stage, a power of 520 W total can be achieved in an extremely compact case. The non-amplifiable ninth channel can be used to drive a subwoofer via the mono AP1 D amplifier.
-
Audison APBMW A4E
ACCESSORIES KIT
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
-
Audison APBMW BIAMP 1
BMW – MINI OEM REPLACEMENT
This Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The “T” connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
-
Audison APBMW BIAMP 2
BMW – MINI OEM REPLACEMENT
APBMW BIAMP 2 Plug & Play T-harness provides the ability to:
1. Take the front speaker output signal from the OEM head unit through the under-seat woofer connector and route it to the AP bit amplifier input.
2. Separately route the signal from the AP bit amplifier outputs to the front midrange housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables.
The APBMW BIAMP 2 is compatible only with BMW and MINI vehicles that are not provided with an OEM amplifier. The package contains a pair of cables, for left and right channels. The cables are 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed.
-
Audison APBMW K4E
2-WAY SYSTEM FOR BMW-MINI
The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy.
The 100 mm (4″) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction.
The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
-
Audison APBMW K4M
2-WAY SYSTEM FOR BMW-MINI
The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy.
The 100 mm (4″) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction.
The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
-
Audison APBMW REAMP 1
BMW – MINI OEM REPLACEMENT
This Plug&Play harness provides the ability to replace the OEM BMW amplifier with an Audison AP bit on BMW vehicles equipped with the optional “Hi-Fi” sound system.
The OEM seven-channel analog amplifier is connected via a forty-two pin multipolar connector. -
Audison APBMW S8-2
SUBWOOFER FOR BMW-MINI
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.
-
Audison APBMW S8-4
SUBWOOFER FOR BMW-MINI
Subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration.
-
Audison APBMW X4E
COAXIAL FOR BMW-MINI
The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front or the upgrade of the rear system.
The 100 mm (4″) APBMW X4E, with basket and fixing screws dedicated to the specific car model, feature a water-repellent pressed-paper cone for natural and color-free mid-range frequencies.
The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties, offers optimized dispersion features for OEM placement, elevating the sound stage to a realistic level.