Parameters T&S |
Bass 400 8″ |
Re |
3,6 |
Impedance |
4+4 |
Fs (Hz) |
49 |
Qes |
0,44 |
Qms |
2,16 |
Qts |
0,36 |
Sd (Cm²) |
206 |
Vas (Liters) |
7 |
BL (T/L) |
15 |
Mms (g) |
90 |
Xmax (mm) |
10 |
Efficiency (%) |
0,18 |
SPL (dB @ 1w/1m) |
85 |
Frequency Response (Hz) |
30-600 |
Banda Bass 400 8″ 4+4 Ohms
DUAL VOICE COIL SUBWOOFER @ 400 WATTS RMS
The Subwoofers Banda Bass 400 line was developed for internal (SPL and SQ) and external (Trio) automotive sound systems that require Subwoofer with excellent definition and great cost-benefit relation.
Description
Related products
-
Match PP 7E-D
For every purpose the right kind of bass – these subwoofers are the ideal complement for the MATCH Plug & Play amplifiers. Make your choice for the right combination depending on trunk space and your demand for maximum sound pressure level.
These subs really prove that the intelligent combination of amplifier with extensive DSP technology and speaker can lead to deep and powerful bass response in your car, even with small sized enclosures. The secret lies in the “team play” of both components – only in combination with the MATCH Plug & Play amps these subwoofers will be able to deliver ultimate acoustical performance that will totally take you by surprise!
-
Audison APS 10 D
The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
-
Audison APS 8 R
With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.
-
Match PP 8W-Q
You didn’t find the type of enclosure sub you are looking for? – If none of the MATCH Plug & Play enclosure subs fits in your car with respect to shape and / or size, then you have the chance to build your “personalized” version by yourself. Therefore, we offer the single woofers of our Plug & Play series, which are 100 % identical to the drivers that are used in the pre-loaded variants. As long as you choose the net volume and port tuning frequency according to the installation instructions, we guarantee the same acoustical performance as our “standard” subwoofers.