Helix QE10
The QE10 vented subwoofer enclosure is the perfect solution for all those who don´t want to build an enclosure for the Q 10W subwoofer chassis by themselves.
Thanks to the very solid construction made from rigid MDF panels as well as the meticulous alignment to the Q 10W driver, excellent bass performance is guaranteed.
A further feature highlight is the 4-pole connection terminal, which allows most flexible configurations with 2 x 2 Ohms, 1 x 4 Ohms or 1 x 1 Ohm impedance.
Description
- Massive vented subwoofer enclosure made from rigid MDF in order to minimize cabinet vibrations
- Large-sized DoubleJet port with 38 Hz tuning frequency for deep bass response
- 4-pole connection terminal with metal bracket for flexible connection configurations – 2 x 2 Ohms, 1 x 4 Ohms or 1 x 1 Ohm
- Sturdy carpet surface with embroidered HELIX logo
- Speaker protection via stable metal bars
Related products
-
Audison APBX G6
The Plug&Sound sealed passive subwoofer system integrates perfectly into the car’s interior. The subwoofer itself has been engineered to mate perfectly with the available enclosure volume, exploiting all the power the AP8.9 bit delivers.
-
Audison APBX 10 DS
The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.
-
Audison APBX 8 R
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as “cabin gain”. The 8-inch single 4 Ω voice-coil subwoofer has a powerful motor that maximizes efficiency in combination with the AP8.9 bit amplifier. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AP4.9 bit / AP4 D bridged channels, capable of delivering 260 W rms.
-
Helix T 10E
The new entry into the world of HELIX subwoofers – the HELIX T 10E
Small in size but a giant in sound performance – smart details like the stiff glassfiber-paper compound cone, the 4-layer voice coil with dual ventilation system or the large-sized bassreflex port assure rich bass response and maximum sound pressure without neglecting acoustical details or sonic precision.
The sturdy enclosure made from rigid MDF panels is covered with hard-wearing carpet and provides, in combination with the stable metal bars, perfect protection for the subwoofer chassis.
The T 10E impressively proves that powerful bass is no matter of budget and doesn’t necessarily come along with large enclosure dimensions.