-
Power @ 1Ω: 1 x 500 watts
-
THD @ Rated Power < 0.2%THD
-
Power @ 2Ω: 1 x 300 watts
-
Power @ 4Ω: 1 x 200 watts
-
Signal to Noise Ratio > 85dB
-
THD + Noise < 0.2%
-
Efficiency > 85%
-
Frequency Response 10Hz to 200Hz ±1dB
-
Input Sensitivity .25v to 5v
-
Dimensions in mm: 160(W) x 52(H) x 179(L) Overall: 160(W) x 52(H) x 205(L)
Zapco ST-500XM II
Mono Class D Bass Amplifier
All the ST-XM Class D bass amps are 1Ω stable as necessary in today’s market.
Description
Related products
-
Helix M FOUR
If you like to rev up your front and rear speakers, the M FOUR will be exactly the right “tool” to do so. With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp will heat up your voice coils in no time despite its super-compact dimensions. On the other hand the M FOUR stays totally cool thanks to the highly efficient Class D design topology. 3-channel or 2-channel configurations are possible as well, delivering up to 2 x 200 Watts RMS of clean and undistorted output power.
Needless to say that the M FOUR is equipped with a bunch of intelligent attributes like “start-stop capability” and our proprietary “ADEP” highlevel input so that it easily deals with all installation challenges of modern cars. Finally the extensive audio features will offer a sound quality at its best.
-
Audison Prima AP F8.9 bit
8 CH AMPLIFIER WITH 9 CH DSP
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio.
The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
-
Match UP 7DSP
The UP 7DSP is the most powerful MATCH DSP amplifier and comprises our new ADEP.3 circuitry. It offers seven amplifier channels in total as well as an additional preamp output, which allows – in combination with its integrated 8-channel DSP – to perfectly drive individual and complex speaker configurations. Two of the output channels deliver 160 Watts RMS into 2 Ohms – plenty enough for fuelling even large subwoofers.
But brute force is nothing without “smart control” – that’s why the UP 7DSP incorporates a stunning powerful 64 Bit DSP of the latest generation, which enables to realize all-new revolutionary and proprietary sound features like the “Augmented Bass Processing”, the “StageXpander” or the “RealCenter” function. Take us by our word – you will experience a truly breathtaking sound performance.
But that’s not enough – simply enjoy music from your smartphone in unprecedented quality. The UP 7DSP comes up with a MATCH Extension Card slot (MEC) for additional input and output interfaces like e.g. our Bluetooth® Audio Streaming module or a High Resolution Audio USB sound card.
Thanks to our professional and user-friendly DSP PC-Tool software V4 the configuration and set-up of the UP 7DSP is pretty straightforward and intuitive.
-
Helix D ONE
The new entry into the HELIX world! The amplifiers of the D series are solely modest with respect to pricing. Everything else is thoroughly pure HELIX quality without any compromises. Loads of power, excellent measurement data and a whole bunch of features ensure a pristine and crispy sound experience!
Absolutely nothing has been missed for powerful bass reproduction – the active crossover with subsonic filter, the lowpass filter, phase control and bass boost are equally as self-evident as the intelligent highlevel input that incorporates Audiotec Fischer´s proprietary ADEP circuit. Not to mention the cable remote control for volume that is included in delivery.
Thanks to its 1-Ohm stability the D ONE is every else but choosy when selecting an appropriate subwoofer. If you still think that the power output isn’t sufficient, then simply combine two devices to one single powerhouse – the master/slave option makes it possible.The elegant design not only states right from the beginning the amp’s heritage but also allows an easy integration into your car thanks to its compact dimensions. Get your car “bass-tuned” and simply have fun!